News · 16 November 2026

Wiper Blade Size Chart: 12″ to 28″ Guide for Distributors

Windshield wiper blade clearing rain from a windshield

Short answer: WEILONG front wiper blades come in 12 sizes from 12″ (300 mm) to 28″ (700 mm), rear blades run 8″ to 16″, truck blades 24″ to 28″, and bus blades go up to 40″ (1000 mm). The size is the length of the rubber blade — measure the old blade end to end, match it in the chart below, and check the adapter type before ordering. Getting the size right is what stops the most common distributor headache: blades that arrive, do not fit, and come back.

Front wiper blade size chart (inches to mm)

WEILONG's standard front-blade range covers 12 sizes. Note the odd sizes — 17″, 19″ and 21″ — which many generic charts skip, and which are exactly the sizes buyers most often ask us to confirm:

Inches12″14″16″17″18″19″
Millimetres300350400425450475
Inches20″21″22″24″26″28″
Millimetres500525550600650700

This range covers WEILONG's boneless, hybrid, metal-frame and winter front blades — including the WL-818 Multi-Fit, WL-616, WL-618, WL-621, WL-622, WL-626, WL-630 and the WL-629 winter blade rated to −40°C. One inch equals 25.4 mm, so a blade sold as 20″ is the same blade sold as 500 mm; the two numbers describe one length, not two products.

Rear, truck and bus sizes

Rear blades are a separate range. The WL-623 rear wiper covers 8″ to 16″ (200–400 mm) in one-inch steps — 8″/200, 9″/225, 10″/250, 11″/275, 12″/300, 13″/325, 14″/350, 15″/375 and 16″/400 — for SUVs and hatchbacks. Truck blades run 24″, 26″ and 28″ (600–700 mm), including named fitments for Delong / Delong M3000 and Jiefang J6, plus a version with a water-spray hose. Bus blades are screw-mounted at 32″ (800 mm), 36″ (900 mm) and 40″ (1000 mm), with a separate 24″ bolt wiper for school buses and Beiben buses.

How to measure — and the two mistakes to avoid

Measure the blade, not the arm. Lay the old blade flat and measure the rubber end to end, or read the size printed on the blade itself. Then check two things buyers most often miss. First, the two front blades are often different lengths — a car that takes 24″ on the driver side may take 18″ on the passenger side, so always measure both and order a pair, not two of the same size. Second, size alone does not guarantee fit: the adapter must match the wiper arm. WEILONG blades use six adapter families covering hook, push-button, pin and bayonet arms — confirm the arm type with the car make, model and year, or send a photo of the arm, before placing the order.

Ordering sizes as a distributor

For a first order, the practical approach is to stock the sizes that move fastest and order the odd sizes against confirmed demand — the 12-size front range means no single order needs to carry everything. Send the size list with quantities per size, not just a total piece count: the quotation, the sample and the packing are all built from that list. WEILONG's minimum order is 1,000 pieces, samples take 7–15 days and bulk orders 20–30 days, loading from Qingdao or Tianjin ports, with a 30% T/T deposit and 70% before delivery. Full inch-to-mm charts for each model are also on the product pages and the FAQ page.

Frequently asked questions

What sizes do WEILONG front wiper blades come in?

Front blades cover 12 sizes from 12 inches (300 mm) to 28 inches (700 mm): 12, 14, 16, 17, 18, 19, 20, 21, 22, 24, 26 and 28 inches. Rear blades (WL-623) cover 8 to 16 inches (200-400 mm), truck blades 24 to 28 inches, and bus blades 32, 36 and 40 inches.

How do I measure a wiper blade size?

Measure the rubber blade end to end in inches, or read the size printed on the old blade. One inch equals 25.4 mm, so a 20-inch blade is 500 mm. Always measure both front blades — driver and passenger sides are often different lengths.

What is the minimum order for WEILONG wiper blades?

The minimum order is 1,000 pieces. Samples take 7-15 days and bulk orders 20-30 days, loading from Qingdao or Tianjin ports, with a 30% T/T deposit and 70% before delivery.

Need the right sizes for your market?

WEILONG supplies boneless, hybrid, metal frame, winter, rear, truck and bus wiper blades for importers and distributors, in sizes from 8″ to 40″. Send your size list and quantities for a quotation:

Chat on WhatsApp   Jady@weilongwipers.com

← Back to all buying notes