News · 17 November 2026
5 Signs Your Windshield Wipers Need Replacing
Short answer: replace your wiper blades when you see streaking, squeaking or chattering, skipped spots, or cracked rubber — or when you cannot remember the last time you changed them. If you have 2 or more of these 5 signs, the blades are due. The usual replacement interval is every 6 to 12 months, sooner in hot sun, heavy rain or snow. A new set takes minutes to fit and restores a clear view in the rain — it is one of the cheapest safety fixes on a car.
1. Streaking or smearing on the glass
This is the sign most drivers notice first: after each wipe, thin lines of water stay on the glass instead of a clean, clear sweep. Streaking usually means the rubber edge is worn, hardened or torn, so it no longer makes even contact with the windshield. Before replacing, clean the blade and the glass — road film and dirt can cause streaks too. If the streaks stay after cleaning, the rubber itself is finished and a new blade is the fix.
2. Squeaking or chattering noise
A blade that squeaks, judders or chatters across the glass instead of gliding is telling you its rubber has hardened or its frame no longer presses evenly. Heat and sun age rubber fastest, so this sign often appears after a hot summer. A noisy blade is not only annoying — uneven pressure is also what leaves the streaks and missed spots in signs 1 and 3.
3. Skipping parts of the windshield
If the wiper leaves untouched patches — usually at the ends of the sweep or in the middle of the blade — it is no longer following the curve of the glass. Bent frames, worn spring steel and rubber that has taken a set after months parked in one position all cause this. Check both front blades: driver and passenger blades are often different lengths, so a skipped patch on one side may simply be the wrong size there. WEILONG front blades cover 12″ to 28″ (300–700 mm) in 12 sizes, including the odd 17″, 19″ and 21″ sizes — see the wiper blade size chart.
4. Cracked or split rubber
Lift the blade and look at the rubber edge. Cracks, splits, nicks or a strip peeling away from the frame mean the blade is done — no cleaning or adjustment brings it back. Rubber cracks from sun, heat, cold and ozone, and once the edge is damaged it drags water across the glass instead of clearing it. A blade frozen to the glass and then switched on can tear in one pass. For winter use, the WL-629 snow wiper is rated to −40°C — see the winter wiper buying guide.
5. You cannot remember when you changed them
If you cannot remember the last change, the blades are almost certainly past their best. Rubber ages even when the car sits parked, so a blade that is two years old is worn out whether it looks it or not. This is the sign to use as a simple rule: if you have to think about it, change them. Drivers who replace every 6 to 12 months — at the start of the rainy season, or before winter — never have to guess.
What to order when it is time
Replacing is quick, and ordering is too, if you send the right details: the car make, model and year, or the length of the old blade in inches. WEILONG supplies boneless, hybrid, metal-frame, winter, rear and truck and bus blades — front 12″ to 28″, rear WL-623 8″ to 16″, bus blades up to 40″ — with six adapter families covering hook, push-button, pin and bayonet arms, so the adapter must match the arm as well as the size. For distributors, the minimum order is 1,000 pieces, samples take 7–15 days and bulk orders 20–30 days, loading from Qingdao or Tianjin ports, with a 30% T/T deposit and 70% before delivery.
Frequently asked questions
How often should windshield wiper blades be replaced?
Every 6 to 12 months is the usual interval — sooner in hot sun, heavy rain or snow, and sooner still if any of the 5 signs above appear. Rubber ages even when the car is parked, so age matters as much as mileage.
What causes wiper blades to streak?
Streaking usually means the rubber edge is worn, hardened or torn and no longer makes clean contact with the glass. Dirt on the blade or windshield can cause it too, so clean both first — if the streaks stay after cleaning, the blade needs replacing.
What size wiper blades do I need?
Measure the old blade end to end, or send the car make, model and year. WEILONG front blades cover 12 to 28 inches (300-700 mm), rear blades 8 to 16 inches, and bus blades up to 40 inches. The two front blades are often different lengths, so measure both.
How many signs do you have?
Count them: streaking, squeaking, skipped spots, cracked rubber, or a change date you cannot remember. Two or more means new blades — and if you buy for resale, stock the sizes your market asks for most: