News · 20 November 2026
Truck and Bus Wiper Blades: Heavy-Duty Sourcing Guide for Fleets
Short answer: truck and bus wiper blades are a different product from car blades, not a longer version of them. Commercial windshields are taller and flatter, the blades are bigger — truck blades 24″ to 28″ (600–700 mm), bus blades 32″, 36″ and 40″ (800–1000 mm) — and the mounting is different too: screw, internal screw, bolt or wide interface, matched to the vehicle, not to a hook arm. WEILONG's truck and bus range is framed and heavy-duty — imported natural rubber strips, high-elasticity memory steel sheets and multi-point metal frames — with named fitments for the Shacman Delong / Delong M3000 and the Jiefang J6.
Why car blades do not fit commercial vehicles
A car blade is built for a curved windshield and a hook or push-button arm, in sizes up to 28″. A bus windshield is a large, nearly flat sheet of glass, and a truck windshield sits almost upright — both need a longer blade that holds even pressure across its whole length, and a mounting that bolts or screws on rather than clipping to a small hook. Fit a car blade to a bus and it will miss the corners, chatter at speed, or come off its arm entirely. That is why the truck and bus range is organised by vehicle model and mounting, not by car brand: send the vehicle, the size and the mounting, and the blade is matched from there. See the full range on the truck and bus wiper blades product page.
Bus blades: 32″, 36″ and 40″, screw-mounted
WEILONG bus blades come in three sizes — 32″ / 800 mm, 36″ / 900 mm and 40″ / 1000 mm — with screw mounting as standard and an internal-screw (inward tuck) variant in the same three sizes. The mounting matters as much as the length: order the wrong one and the blade will not seat, however right the size is. A separate bolt wiper is made in 24″ / 600 mm only, bolted on, for school buses, Beiben buses and similar vehicles. When you order, state the bus model, the blade length and whether the mounting is screw, internal screw or bolt — a photo of the arm end settles it if you are unsure.
Truck blades: named fitments, wide interface, spray nozzle
Truck blades run 24″, 26″ and 28″ (600–700 mm) with a wide interface, and WEILONG makes dedicated blades for the Shacman Delong and Delong M3000 and for the Jiefang J6, as well as for other truck models. There is also a truck wiper with a water spray hose (nozzle) for vehicles fitted with washer spray systems. All of them share the same heavy-duty framed construction: imported natural rubber strips, high-elasticity memory steel and a multi-point metal frame, built for the long, daily duty cycles of a working truck rather than the occasional use a car blade sees. For the car side of the range, the wiper blade size chart covers front blades from 12″ to 28″.
What to send when you order for a fleet
Fleet orders go fastest when the inquiry lists four things: vehicle model (for example Delong M3000, Jiefang J6, or the bus model), blade length in inches or millimetres, mounting type (screw, internal screw, bolt or wide interface), and quantity. Mixed sizes in one order are fine — a fleet rarely needs one size only — and the same list works for a distributor stocking a market: the three bus sizes and the three truck sizes cover most commercial vehicles, so a small, well-chosen stock list does the job. If a blade is being fitted for the first time, the 60-second change guide shows the same lift, release, click and test steps — commercial blades fit the same way, only the connector is heavier.
Ordering and trade terms
For distributors and fleets, the minimum order is 1,000 pieces, samples take 7–15 days and bulk orders 20–30 days, loading from Qingdao or Tianjin ports, with a 30% T/T deposit and 70% before delivery. Private-label supply is available: choose from 70+ ready retail-box designs or send your own artwork. WEILONG is ISO 9001:2015 certified and holds a CE attestation for wiper blades to ISO 9258.
Frequently asked questions
What sizes do WEILONG bus wiper blades come in?
32 inches (800 mm), 36 inches (900 mm) and 40 inches (1000 mm), with screw mounting as standard and an internal-screw variant. A separate bolt wiper is made in 24 inches (600 mm) for school buses, Beiben buses and similar vehicles.
Do you make wiper blades for Chinese trucks?
Yes — dedicated truck blades with a wide interface in 24″, 26″ and 28″, including fitments for the Shacman Delong and Delong M3000 and the Jiefang J6, plus a truck wiper with a water spray hose (nozzle).
How do I order truck and bus blades for a fleet?
Send your vehicle models, sizes and quantities on WhatsApp or by email. Samples are prepared in 7–15 days and bulk orders in 20–30 days, loaded from Qingdao or Tianjin port; the MOQ is 1,000 pieces across the wiper range.
Stocking for fleets?
If you supply fleets, workshops or bus operators, the truck and bus range is the part of the catalogue your car-blade customers cannot get from a car parts shelf — and the order starts with a vehicle list: