News · 19 November 2026
Rear Wiper Blades for SUVs and Hatchbacks: Completing Your Product Range
Short answer: the rear wiper is a different product from the front pair, not a smaller copy of it. It is shorter — 8″ to 16″ (200–400 mm) — shaped for the more curved rear glass, and it usually clips on with a single press fitting instead of a hook arm. SUVs, hatchbacks and MPVs all carry one, so a distributor that stocks only front blades is leaving the third blade of every one of those cars unsold. The WEILONG rear blade is the WL-623, covering 8″ to 16″ in nine sizes.
Why the rear blade gets forgotten — and why that is the opportunity
Drivers check the front blades every time it rains, because they look through them. The rear blade is checked almost never: the driver glances at the rear mirror, sees a smeared patch, and blames the rain. By the time anyone looks, the rubber is often cracked or torn — the same 5 signs a wiper needs replacing apply at the back, but nobody is watching for them. For a distributor, that is the point: the rear blade is the easiest add-on sale in the range. A customer who orders a front pair for an SUV or hatchback almost always needs the rear blade too, and the question "do you need the rear one as well?" costs nothing to ask.
The WL-623: what it is and what it fits
The WL-623 is WEILONG's multi-functional rear wiper, made for the rear windows of SUVs, hatchbacks and other cars with a rear wiper. It has a streamlined aero design, a frameless steel backplate, a metal centre bracket and natural rubber, and it is made to fit 99% of car models in its size range. Sizes are 8″/200, 9″/225, 10″/250, 11″/275, 12″/300, 13″/325, 14″/350, 15″/375 and 16″/400 mm — nine sizes, and the most commonly ordered are the middle of the range, 11″ to 14″. WEILONG also makes premium rear wipers, the WL-647 and WL-648, built for a precision fit on curved rear glass with quiet, streak-free wiping and no-tools installation. Like the front blades, rear blades are available for left- and right-hand-drive markets.
Front vs rear: the three differences that matter when ordering
First, size: front blades run 12″ to 28″ (300–700 mm); rear blades run 8″ to 16″. A 12″ blade is the smallest front blade and a mid-size rear blade — the ranges overlap at one size only, so ordering "one more of the same" is wrong. See the wiper blade size chart for the full front and rear tables. Second, fitting: most front blades fit a hook arm, or a multi-adapter system such as the WL-818's 19-adapter LB system — see how to choose wiper blade adapter types. Rear blades usually clip on with a single press fitting, and the fitting varies by car, so the car make, model and year matter as much as the length. Third, shape: rear glass curves more than the windscreen, so the rear blade's pressure has to follow a tighter arc — a flat front blade pressed onto rear glass will wipe the middle and miss the edges.
How to measure and order a rear blade
Measure the old blade end to end, in inches, and check the fitting at the arm end before ordering — a photo of the arm end settles most questions. If there is no old blade to measure, send the car make, model and year and say it is the rear blade, not the front pair. Change it the same way as a front blade — lift the arm, release the old blade, clip the new one on until it seats, lower the arm gently and test it — the whole job takes about a minute; see how to change wiper blades in 60 seconds. And replace it on the same schedule as the front pair, every 6 to 12 months: a rear blade left for two years will be cracked rubber on curved glass, which is exactly when the driver needs it most, in rain or reversing.
Stocking rear blades: a small range that completes the sale
Rear blades need far less shelf space than front blades — nine sizes, and most of the volume sits in four or five of them. For a distributor, the practical way to stock them is as a third blade on every SUV and hatchback order: front pair plus rear, in one shipment, in one box. That is also how private-label packaging works best — the same box design family, with the rear size printed on it; WEILONG offers 70+ ready packaging designs and custom packing. For distributors, the minimum order is 1,000 pieces, samples take 7–15 days and bulk orders 20–30 days, loading from Qingdao or Tianjin ports, with a 30% T/T deposit and 70% before delivery. Front blades cover 12″ to 28″, rear WL-623 covers 8″ to 16″, and bus blades go up to 40″ — one supplier, one shipment, the whole car covered.
Frequently asked questions
What size is a rear wiper blade?
Most rear blades are 8 to 16 inches (200-400 mm) — much shorter than front blades. The WEILONG WL-623 rear wiper covers exactly that range, in 8, 9, 10, 11, 12, 13, 14, 15 and 16 inches. Measure the old blade end to end, or send the car make, model and year.
Are rear wiper blades different from front wiper blades?
Yes. Rear blades are shorter, built for the more curved rear glass, and usually clip on with a single press fitting instead of a hook arm. A front blade will not fit the rear, and a rear blade is too short for the front — they are different products, ordered by different sizes.
How often should a rear wiper blade be replaced?
On the same schedule as the front pair: every 6 to 12 months, sooner if it streaks, skips or leaves part of the glass unwiped. Rear blades are easy to forget because drivers look through them less — check the rear blade every time the front pair is changed.
Complete the range
If you stock front blades for SUVs and hatchbacks, the rear blade is the sale you are already halfway to making — ask for the third blade on every order: